AVAILABLE BODY SIZES
| 9' | 10' | 12' |
standard package summary
| COMPOSITE | STEEL | |
| Full side-to-side 11gauge roll formed steel rear buckplate with recessed rubber mounted lights to shield and protect lights from impact. All lights and reflectors meet FMVSS 108 requirements. | ● | ● |
| Bodies constructed from 11 gauge roll formed A40-A60 coating weight steel frame with powder coat black finish. | ● | ● |
| 4˝ 11 Gauge formed steel longitudinal body rails. | ● | ● |
| 12˝ crossmember spacing throughout all body sizes. | ● | ● |
| 4˝ structural steel for gooseneck tow package. | ● | |
| 1/8” steel treadplate floor | ● | |
| 7 gauge steel floor (smooth or 3/16” treadplate) | ● | |
| Entire body black powder coated finish over industry leading E-Coat priming. | ● | ● |
| Bulkhead grid window design with tapered bulkhead for ship-through. | ● | ● |
| Bulkhead lights (L.E.D Stop, Tail & Turn with incandescent back-up) | ● | |
| Bulkhead mounted tail lights | ● | |
| Impact resistant, 3/4˝ white composite floor that reduces friction and requires less energy to move payloads! It also reflects light, reduces thermal conductivity, and allows for safer and easier material handling with no moisture wicking properties like wood. . | ● | |
| Rear steel construction drop-down tailgate with holding chain and full rear light cluster drop apron. | ● | ● |
| Body available in lengths of 9´, 10´ and 12´ for dual wheel | ||
| application. | ● | |
| Reinforced external stake pockets with outside 2˝ tie rail. | ● | |
| Recessed fastener system allows for a smooth floor surface while growth matrix allows for proper expansion and contraction of material. Requires composite floor. | ● | |
| Fifth wheel/gooseneck hitch | N/A | ● |
| All models available in high gloss black powder coat finish only. | ● | ● |
| Model RTB-813 - Single cylinder double acting design for light-duty single axle trucks with bodies from 9’-12’ | ● | ● |
| ICC Bumper is installed when a hitch assembly is not selected and conforms to all Federal, State & local motor vehicle laws | ● | ● |
| anding Rail consist of 3/8" x 2 Strap Steel welded to the external stake pockets of the body for securing cargo before transit. | ● | |
| Weld on steel bulkhead with window grid cut-out on bulkhead. | ● |
Contractors
» Steel Contractor
| Composite Floor and Wall Panel Construction | 10 Gauge Steel Floor and Wall Construction | Weight Savings | |
| 10’ | 1750lbs | 2237lbs | -487 lbs |
| 12’ | 2,100 lbs. | 2,684 lbs. | -584 lbs. |
| 14’ | 2,450 lbs. | 3,131 lbs. | -681 lbs. |
| 16’ | 2,800 lbs. | 3,578 lbs. | -778 lbs. |
Weights represented reflect standard body specifications, standard bulkhead and standard cab shield.
RUGGED AMERICAN STEEL CONTRACTOR BODIES
The Rugged American Steel Contractor Body is a tough and versatile body, combining above bed and below bed storage. The drop down tailgate is a standard feature, and bulk material can be easily transported and dumped with the addition of an optional RTB-813 underbody hoist.
The double Body Armor process provides acrylic E-Coat priming to ensure complete primer protection, and a durable, high gloss Powder Coat finish provides corrosion protection that is unmatched by any other contractor body.
Add the TRG strength-tested overhead material rack for longer material storage.
***Bodies shown with optional equipment