standard package summary
| MARAUDER | MARAUDER III | |
| All steel construction | • | • |
| Body shell includes continuous weld design | • | • |
| 10 Gauge high-strength fully welded steel floor and inner wall with dual side wall construction and 12 Gauge two sided A40-A60 coating weight steel outer walls and E-Coat primer powder coat finish | • | • |
| Interlaced understructure 7 gauge formed channel long sills and 3˝ structural crossmembers | • | • |
| Full depth front and rear corner posts | • | • |
| Rear posts include tarp tension rod cleats | • | |
| Full-height bulkhead with vertically punched window | • | • |
| Floor to wall radius/angle in load space to prevent bridging of material | • | • |
| Three panel tailgate bo•ed and reinforced | • | • |
| Tailgate chain banjo eyes | • | • |
| Full width rear apron with double acting tailgate and forward tailgate release handle. Tailgate release linkage is adjustable. | • | • |
| Fully bo•ed top rail with dirt shedder side | • | • |
| All models have 2 vertical side braces | • | • |
| 1/2 (20˝) two-sided 10 Gauge A40-A60 coating weight steel Cab shield. Cab shield is panned and bo•ed for reinforcement. | • | |
| 1/2 (20˝) two-sided 12 Gauge A40-A60 coating weight steel tapered Cab shield. Cab shield is panned, bo•ed for reinforcement, a pre-punched design for tarp load cover and tarp tension rod cleats | • | |
| Heavy-duty hinges with grease fittings for lubricating | • | • |
| Subframe mounted double-acting electric hydraulic scissor hoist with an 8-13 ton capacity and 50° dumping angle. Hoist assembly includes lubricating grease zerk fittings on hoist and hinge assembly | • | • |
| ABC Latch-N-Go Quick Tailgate Release with internally protected linkage | • | |
| Heavy-duty latch pins with grease zerk fittings | • | • |
| Front full-height and rear reinforced sideboard gussets | • | |
| Entire body E-Coat immersion primed | • | |
| Durable, high gloss polyester Powder Coat finish | • | |
| Available in four powder coat colors: Red, Black, White and Charcoal | • | |
| L.E.D. clearance lights | • | |
| Body prop and back-up alarm | • | • |
| All required FMVSS108 lighting flaps and reflectors | • | • |
| 3 Year Limited Warranty | • | • |
| BODY LENGTH (FT.) | ||||||||
| 8´ | 9´ | 10´ | 11´ | |||||
| CAPACITY | 2-3 YD | 3-4 YD | 2-3 YD | 3-4 YD | 2-3 YD | 3-4 YD | 2-3 YD | 3-4 YD |
| FIXED SIDES | • | • | • | • | † | • | † | • |
| DROP-SIDES | • | • | † | • | † | • | † | • |
| Cab-to-Axle | 60˝ | 60˝ | 84˝ | 84˝ | ||||
| RTB-813 Capacity (tons) | 13 | 11 | 10 | 9 | ||||
| † Denotes Special Order Body – extra lead time required. | ||||||||
| Body Length (ft.) | 8´ | 9´ | 10´ | 11´ |
| Cab-to-Axle | 60˝ | 60˝ | 84˝ | 84˝ |
| RTB-813 Capacity (tons) | 13 | 11 | 10 | 9 |
| Note: Hoist capacity ranges 8-13 tons, based on body length. RTB-813: Capacity based on water level load | ||||
Dump Bodies
» Standard Duty
| Composite Floor and Wall Panel Construction | 10 Gauge Steel Floor and Wall Construction | Weight Savings | |
| 10’ | 1750lbs | 2237lbs | -487 lbs |
| 12’ | 2,100 lbs. | 2,684 lbs. | -584 lbs. |
| 14’ | 2,450 lbs. | 3,131 lbs. | -681 lbs. |
| 16’ | 2,800 lbs. | 3,578 lbs. | -778 lbs. |
Weights represented reflect standard body specifications, standard bulkhead and standard cab shield.
MARAUDER STANDARD DUTY DUMP BODIES
The ABC Marauder Standard Duty Dump Body is available in 2-to-3 and 3-to-4 cubic yard capacities, with body lengths from 8' to 11'. The Marauder is quality manufactured with dual side wall construction, using corrosion-resistant A40-A60 coating weight steel for the outer shell, and 10-gauge high-strength steel for the inner shell and floor. The body is then immersed in ABC's acrylic E-Coat priming system, which includes baking the primer onto the steel, and finishing with a top coat of durable Powder Coat finish.
The Marauder comes with quick release tailgate hardware and is equipped with the RTB-813 electric/hydraulic underbody scissor hoist, featuring power-up/power-down capability with a hoist rating of up to 13 tons or 4 cubic yards.
The Marauder Dump Body product line contains many standard features and options, including a drop-side version with sides that are steel and tough, but lightweight, alloy aluminum. Marauder Dump Bodies are covered by a 3 year limited warranty.
***Bodies shown with optional equipment