standard package summary

	MARAUDER II
10 Gauge hi-tensile steel construction	•
Continuous welded design	•
Integral ½ Cab protector panned and bo•ed for reinforcement	•
Sides radius to floor 45,000 psi yield strength floor	•
Interlaced understructure (8-gauge hi-tensile steel)	•
10´ Models have 4 vertical side braces radii in design	•
Fully bo•ed top rail and dirt shedder side	•
Front reinforced corner posts	•
Full depth rear corner posts with flame-cut hardware and banjo eyes	•
Three panel tailgate with heavy-duty top rail and quick release hardware	•
Full width rear apron	•
Coal chute in center panel of tailgate	•
Heavy-duty tailgate hardware and forward driver-side release arm with adjustable linkage	•
Full length subframe mounted dual lift-arm hoist	•
Dual body props and backup alarm	•
Rubber isolated L.E.D. lights (Includes clearance, stop, tail and turn lights)	•
Single-stage enamel finish	•
All required FMVSS108 lights, flaps and reflectors	•
3 Year Limited Warranty	•

RTB-813 Hoist load capacity at 50˚ dump angle

Note: Hoist capacity ranges 8-13 tons, based on body length. RTB-813: Capacity based on water level load

Standard Duty

	Composite Floor and Wall Panel Construction	10 Gauge Steel Floor and Wall Construction	Weight Savings
10’	1750lbs	2237lbs	-487 lbs
12’	2,100 lbs.	2,684 lbs.	-584 lbs.
14’	2,450 lbs.	3,131 lbs.	-681 lbs.
16’	2,800 lbs.	3,578 lbs.	-778 lbs.

Weights represented reflect standard body specifications, standard bulkhead and standard cab shield.

***Bodies shown with optional equipment